It is a tool used for putting security loops at the end of the wire rope. You can use it for attaching signs and displaying samples for marine, industrial rigging, theatrical, and aircraft. You can also use it if you want to make the versatile cable loops with the desired size and length. Steel and 8th-grade bolts made swag tool is strong and durable. It applies a swaging pressure for tightening the bolt when bringing the two halves together. This DIY swaging tool review is a must-read writeup if you have been looking for such a tool.
Appealing Features of BBTools DIY Swaging Tool
Design to Offer Best Service
With a dedicated design, this particular one from BBTools provides the user with the best performance possible. It comes with a gauge, which corresponds with the sleeve size that is being compressed. If the compressor does not pass easily to the gauge, you should adjust the swager by keeping the handles apart with 3/16 Allen wrench. You can adjust by continuing to tighten the set screw of the handle to a ¼ turn until the compressor passes the gauge easily.
Versatile and Multi-Purpose
The tool is a versatile multi-use with a heavy-duty crimping cable tool that crimps from 1/16 to 1/8 inches for several fittings. Some of the fittings include steel, aluminum duplex, and single sleeves, boat rigging, stop sleeves, stainless steel cables, oval sleeves copper and wire ferrules. It is perfect to use when installing rail cables since it has strong crimping. The tool leaves an excellent patterned crimp as well as durable rail cables.
It is super strong, rust-resistant, and durable, manufactured from quality materials like forged Chromium-Molybdenum Steel and High-Carbon steel. The tool has a wire Rope crimper to be used for railing, DIY balustrade, outdoor shades, and decking. The hand crimper contains a combination of forged chromium-molybdenum steel and forged carbon steel, painted for electric –fusion. The cutter cable has two cutting edges with a maximum capacity of 5/32 inches’ soft wire rope, cable rope, copper cable, stainless steel wire, aircraft cable, aluminum cable, and steel wire.
Swager Operation Instruction Manual
It comes with a clear operation manual that instructs on how to compress the object to the proper size. You will also get instructions on how to match your cable’s size, length, and diameter. With this manual, you will be able to get the maximum holding. The instruction manual also shows you how to keep the sleeve to the right angle of the compressed tool in the swaging tool. You can keep the sleeve well aligned with the jaw grooves, making the device closed completely. The manual keeps you from mishandling your tool and ensures that you get the best performance with very little energy. This way, you are saved from the need to frequently or soon replace your tools or components.
The swager requires regular monitoring to prevent wears, tears, and other damages. After using this tool for a long time, you will need to check the tool string by pulling it out. You will also need to do a joint check to ensure that the tool is tight enough. Again, you should make sure that you store your tool in a free place from rust. If possible, hang the tool in a wall or put it in a tool kit.
- The tool is compact and very cheap
- It has attractive designs
- It has safe security handles
- The tool is easy to use, with the help of an instruction manual
- Launching the tool is very easy
- Following the instruction manual might be complicated for the first time
Frequently Asked Questions
Does using this tool require much energy to operate?
No, these tools require minimal effort when operating, as you can see in its manual. The tool is lightweight, weighing only 2.9 kilograms. This quality makes your tool very portable and convenient to use.
Can this tool open wide enough to fit a diameter of ½ of a loop ferrule if the diameter of the ferrule hole is 1/8 in diameter while the whole ferrule sleeve is different?
It comes with three sizes of ferrule sleeves. The double 1/8-inch sample hole sleeve is about 3/8-inch while the widest and biggest slot is 5/8-inch. When stretched, the widest slot gives 11/16-inch. The measurement provides the maximum strength required for crimping a tool. Therefore, a 1/2-inch diameter would be a perfect fit.
Would the swaging tool work well for crimping single-hole cable stops for 1/16-inch cable?
Yes, the tool works with all the sizes of cables, although the appropriateness and compatibility depend on how far you stretch your slot.
Though the swaging tool is mostly used in the metalwork field, you can use it for several purposes. It performs best when you want to transform an object’s shape to get the desired form, whether by bending or shaping. Putting security to loops at the end of the wire rope is another common task you can do with the swager. It is effortless to use, as the instruction manual confirms. If you are looking for a DIY swaging tool that offers the best performance with very little energy, the highlights in this article should help you make the right decision.