Disassembling or tearing down decks is one of those DIY projects frequently done in homes. Doing these chores by hand with a crowbar and hammer can be both difficult and tiresome. Having a DIY pallet tool is, therefore, essential for performing these tasks with minimum effort. Some pallets are either made of hardwood or reinforced in the edges with extra nails, making them impossible to remove. The tool also performs excellently in removing deck boards and the overall demolition of wood boards. In this article, we will focus on the stoic tools pallet buster and why it is a must-have for all DIY tasks involving pallets and deck boards.
The tool comes in a package of a complete set, which includes the pallet buster and high-quality leather gloves made of real cowhide. The buster has an extra long pole which is 41½ inches and a diameter of 1.25 inches. The dimensions help provide enough leverage for minimum effort. The pole has three pieces that are assembled tightly to achieve the required length. From end to end, the pallet has a length of 46 inches when assembled. The fork is 6 inches wide, 7½ inches long, and rises to a height of 4½ inches. The space in between the forks is about 2.75 inches.
The gloves are 10 inches by 5 inches in length and width, respectively. They help avoid blisters, splinters, and other injuries that may arise in the course of work.
- Extra-long for comfort and ease during operation
- Easy to assemble and disassemble for easy storage
- Comes with high-quality gloves for safety purpose
- Strong and solid design
- The tool comes with a lifetime warranty
- Long plies take a little more effort and time to rip off
Why You Should Get this Tool
This heavy-duty buster has a 41.5-inch long handle, which comes in three pieces. The pieces are assembled and held tightly by a cotter pin. The length helps increase the mechanical advantage of the tool, thus creating more leverage. Because of the leverage, a much lesser effort is required to rip off pallets. The 3-piece design also makes storage easy and uses less space. After completing the task, the sections can be disassembled easily by removing the cotter pin and pulling out the pieces. The pieces can be tucked away and reassembled when the next task presents itself.
Saves Time and Energy
Ripping apart the pallets and other wooden boards is a tough job if you do not have the right tools. The pallet buster holds up even in dismantling the toughest of boards, pallets, and decks. It rips apart simply, even the ones reinforced with nails. There is no need to sweat it out for many hours when you can take a few minutes with the tool. Some pallets may prove to be more resilient than others and require a bit more energy to rip off. The state is not possible when using hands hammer and crowbar.
The tool is made of tough and long-lasting steel, which is known to be very tough and hold over a long time. The material ensures that it does not yield to pressure even under the toughest conditions. Even when lifting the heaviest boards and other materials, steel is resistant to bending and breaking. This quality gives the tool a longer lifespan. The tool is finished off with a rich dark black color. The color ensures that the tool is corrosion-resistant and can withstand the negative impacts of exposure to corrosive agents. The paint also improves the aesthetic value of the tool.
Comes with leather gloves
Leather gloves, made from real cowhide, are also included in the package. The palms are double-padded, where a lot of force is exerted, and there is a lot of proneness to injuries. The gloves guarantee safety against blisters, splinters, and scrapes.
How do I use this tool to disassemble pallets?
After successfully assembling the pallet tool, the application should be quite simple. You have to pass the hooks below the deck of the pallets at the nailed edge. Carefully apply a slight force downwards on the long handle. Once the force is applied, the hooks counter the movement of the handle by moving upwards. The forceful movement plucks pallet from the frame, and the pallet comes out with the nail. You should do the same for the other side of the pallet. Once the pallet is free, turn it over and remove the nails. Finally, the pallet is reused for other projects around your home, like making furniture.
What else can I do with this tool?
Apart from removing the pallets, there are numerous other tasks you can perform with the tool. From lifting objects, wrecking, and ripping apart deck boards to even wood board demolitions, there is no limit to the work volume you can do with this tool. Instead of ripping off decks and other wooden boards by hand, the tool easily sorts you out.
Are joints created by the 3 piece pole strong?
The pole itself is a solid piece, and the bottom piece fits perfectly on it. The joint is then tightly locked on with a cotter pin to ensure a weak point is not created. The joining mechanism helps in avoiding bends and eventually breaking. The joint is also strategically positioned to ensure that no force is rested on the joint during operation.
Having the right-hand tool is important when you are involving yourself with DIY operations around your home, such as dismantling pallets and other wooden boards. Pallets are a common source of quality reusable timber. The success rate of their operation is highly dependent on this factor. Having a DIY pallet tool in your home will save you a lot of time and energy, as well as ensure the pallets are removed appropriately. Care during this operation minimizes damage and saves the pallets such that they can be reused to make other items. Save yourself the trouble having to struggle with pallets by acquiring this important tool.